Commercial Flagpole - Deluxe Colonial Series ( Internal Halyard )

Our Deluxe Colonial Series Flagpoles are unsurpassed in craftsmanship and beauty. These internal halyard (rope) flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor.

A counterweight,heavily coated with neoprene,attached to the retainer ring,allows the halyard to be lowered for fastening or removing the flag. The halyard is then completely out of reach of vandals. The improved winch is gearless and self-locking at any point,eliminating the need for a separate brake. The direct drive winch provides rapid raising and lowering of the flag with little effort. Pricing below is for Satin Finished Poles only. Also available in Clear Anodized, Bronze Anodized and Black 12 Anodized (Please call for pricing).

The below drop down box is set up in the following manner:

1)The first number is Exposed Flagpole Height

2) The 2nd is Bottom Diameter of the pole ( To get circumference of pole take this number and multiply it by 3.14).

3) The 3rd is Top Diameter of the pole ( to find circumference multiply by 3.14).

4)The 4th is Wall Thickness

5) The 5th is recommended Flag Size and Size of Flag that will be sent with your Flagpole.

6) The 6th number is maximum wind gusts the pole can endure while unflagged.

All poles shipped with instructions for installation.

*Prices are subject to change without notice.

Due to continuing fuel price fluctuations, shipping will not be correctly calculated when you check out. Because of this, you will be notified of correct shipping charges BEFORE we complete the order here and ship the flagpole. Sorry for any inconvenience.